Metal Edge Trim: Style A – Large Pointed – Rose Gold

Description

Metal Edge Trim: Style A – Large Pointed – Rose Gold

With their narrow channel these metal edge trims are specifically designed to be used with thinner materials and quilting cottons. However they can still be used with leather, cork and vinyl. The addition of screw holes in the back ensure a secure fit.

Instructions:

• Simply trace the metal trim onto your paper pattern piece first, and then ADD your seam allowance on second by measuring with a ruler. This way, you will have the perfect shape and a nice fit.
• Interfacing and stabilizer is recommended in your front flap piece.
• After your front flap is complete and turned right side out, check your trim piece for fit, adjust if necessary, and topstitch if desired.
• Slide the metal bar on again and screw in place – do not pre-cut holes for screws, but put them right through the fabric.
• You may want to use clear, fast-grab glue in the channel to secure. You may need a small flat screw driver to press fabric into the channel if it’s tight.

Measurements:

• Overall Width: 7 3/8″ (19 cm)
• Depth at Center: 2 1/2″ (63 mm)
• Channel: 1/8″ (3 mm)